Only after being designed by the most advanced technology, manufactured under stringent guidelines and individually tested, is each Gandini machine ready to be released.
The MTS version of bio-shredders, is equipped with a self contained engine fixed axle and wheels and can be towed by any type of vehicle.
The TPS version of bio-shredders is designed to be attached to the three point linkage of any tractor from which it is powered by the PTO shaft.
The TTS version of bio-shredders is equipped with a fixed axle and wheels which can be towed by any type of tractor.
The PTO shaft for powering the machine is enclosed in the shredder.
The conveyor chain together with the feeding roller assure the machine a high output and the ability to process a wide range of materials which may be contaminated with nails, wire, stones etc.
The special design of the discharge spout allows a very good ejection of material.
The special self sharpening profile of the drop forged hammers allow a minimum of 500 hours of maintanence free shredding.
One of the main characteristics of the MTS group is a 360 degree rotating in feed shute for ease of access.
All machines have specially designed fibre glass covers to protect the rotating components and hydraulic system. These covers reduce the noise levels considerably and are easy to remove for maintenance.
The hydraulic system of each machine is assembled with high quality components such as cast iron motors, oil filtration system and quality electro control valves.
The electronic NOSTRESS device assembled on this series of shredding machines is fully adjustable in relationship to the revs. of the hammer mill which automatically regulates the in-feed of material by an electronic valve. The NOSTRESS device is located inside an antivibration box and is also equipped with an hour-meter recording the operation time of the machine.
